您的位置: 标准下载 » 协会标准 » SAE 美国机动车工程师学会 »

SAE J1616 Recommended Practice for Compressed Natural Gas Vehicle Fuel

作者:标准资料网 时间:2024-05-19 10:25:23  浏览:8524   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE J1616
Title:Recommended Practice for Compressed Natural Gas Vehicle Fuel
Issuing Committee:Fuels And Lubricants Tc 7 Fuels
Scope:Compressed Natural Gas (CNG) is a practical automotive fuel, with advantages and disadvantages when compared to gasoline. it has a good octane quality, is clean burning, easy to meter, and generally normally compressed form 20 690 to 24 820 kPa (3000 to 3600 psig) to increase its energy density thereby reducing its on-board vehicle storage volume for a given range and payload.the properties of natural gas are influenced by (1) the processing of natural gas by the production and transmission companies and (2) the regional gas supply, storage, and demand balancing done by distributuion companies often in concert with pipeline companies to maintain uninterrupted service throughout the year, e.g., peakshaving the propane-air (see U.S. Bureau of Mines Publication 503).This document presents the more important physical and chemical characteristics of compressed natural gas vehicle fuel and describes pertinent test methods for defining or evaluating these properties. In order for compressed Natural Gas Vehicles (NGVs) to effective provide satisfactory and safe operation for users, there is a need to address specific issues relative to the use of natural gas as a vehicle fuel. The two primary areas relate to 1) compressed storage of natural gas and 2) vehicle fuel system and engine performance issues. These provisions have been derived through a joint effort of the SAE TC-7 Natural Gas Vehicle Task Force and the Technology Committee on the Natural Gas Vehicle Coalition.
下载地址: 点击此处下载
【英文标准名称】:AmericanNationalStandard/CSAStandardforConnectorsforMoveableGasAppliances(sameasCSA6.16)
【原文标准名称】:移动式燃气器具用连接器的美国国家标准/CSA标准(同CSA6.16)
【标准号】:ANSIZ21.69-2008
【标准状态】:现行
【国别】:美国
【发布日期】:2008
【实施或试行日期】:
【发布单位】:美国国家标准学会(US-ANSI)
【起草单位】:ANSI
【标准类型】:()
【标准水平】:()
【中文主题词】:连接器;特点;配件;燃气器具;煤气炉;燃气补给线;燃气动力装置;移动的;规范(验收);试验
【英文主题词】:Connectors;Features;Fittings;Gasappliances;Gasstoves;Gassupplyline;Gas-powereddevices;Mobile;Portable;Specification(approval);Testing
【摘要】:Detailstestandexaminationcriteriaforgasapplianceconnectorsconsistingofflexibletubingforconnectinggassupplypipingtoagasappliancemountedoncastersorotherwisesubjecttomovement.Theseconnectorsarelimitedtoamaximumlengthof6feet(1.83m).Theseconnectorsaresuitableforusewithnatural,manufacturedormixedgases,liquefiedpetroleumgases,orLPgas-airmixtures,atpressuresnotinexcessof1/2psi(3.5kPa).
【中国标准分类号】:Q82
【国际标准分类号】:27_060_20
【页数】:
【正文语种】:英语


基本信息
标准名称:高温承压用静态铸造合金管件
英文名称:Static cast fittings of furnace for servicepressure bearing at high temperature
中标分类: 化工 >> 化工机械与设备 >> 化工设备
ICS分类:
替代情况:替代HG/T 3673-2000
发布部门:中华人民共和国工业和信息化部
发布日期:2011-12-20
实施日期:2012-07-01
首发日期:
作废日期:
归口单位:全国化工机械与设备标准化技术委员会
起草单位:四川华源高温炉管有限公司、天华化工机械及自动化研究院
出版社:化工出版社
出版日期:2012-07-01
适用范围

本标准规定了工业炉高温承压用静态铸造合金管件的要求、试验方法、检验验收、标志、包装及贮运等。
本标准适用于石油化工制氢转化炉、乙烯裂解炉及其它高温承压工业炉用静态铸造耐热钢管件和其它铸件。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 化工 化工机械与设备 化工设备